HSS | DMO5
QUALITY AND PERFORMANCE AT A HIGH LEVEL
Semi-automatic, fully automatic and “flying saws” for tubes, profiles and solid materials.
Recommended cutting parameters: 100 – 250m/min
Feed rate: 0,04 – 0,24mm/tooth
Application areas
Halb- und vollautomatischen sowie „Fliegenden Sägen“ für Rohre, Profile und Vollmaterialien.
Empfohlene Schnittparameter: 100 – 250m/min
Vorschub: 0,04 – 0,24mm/Zahn
PVD | Coatings
Currently we offer all standard coatings such as; TiN, TiCN, TiAlN, CrN. Specially developed coatings for extreme sawing parameters are also available.
Ø from 160mm up to 620mm
TOOTH SHAPES
BS
Chipbreaker
C
Pre and post cutter
BW
Curved alternate tooth
A
Also available as AW angle alternate tooth
STANDARD | DIMENSIONS
| Durchmesser Diameter |
Bohrung Bore |
Bund Hub |
Stärke Thickness |
Standard Nebenlöcher Standard pinholes |
|---|---|---|---|---|
| 160 | 32 | 75 | 1,2 / 1,5 / 2,0 | 2/8/45 + 2/11/63 |
| 175 | 32 | 75 | 1,2 / 1,5 / 2,0 | 2/8/45 + 2/11/63 BAIER |
| 200 | 32 | 90 | 1,0 / 1,2 / 1,5 / 1,6 / 1,8 / 2,0 / 2,5 | 2/8/45 + 2/11/63 ASOLE / UNI SLOTS / LANGLÖCHER(*) |
| 210 | 32 | 90 | 2,0 | 2/8/45 + 2/11/63 |
| 225 | 32 | 100 | 1,0 / 1,2 / 1,5 / 1,6 / 1,8 / 2,0 / 2,5 | 2/8/45 + 2/11/63 ASOLE / UNI SLOTS / LANGLÖCHER(*) |
| 40 | 100 | 1,8 / 1,9 / 2,0 / 2,5 | 2/8/55 + 2/12/64 | |
| 250 | 32 | 100 | 1,0 / 1,2 / 1,5 / 1,6 / 2,0 / 2,5 / 3,0 | 2/8/45 + 2/11/63 2/8/45 + 2/9 50 + 211/63 BAIER ASOLE / UNI SLOTS / LANGLÖCHER(*) 2/8/55 + 4/12/64 |
| 40 | 100 | 2,0 / 2,5 / 3,0 | 2/8/55 + 4/12/64 | |
| 275 | 32 | 100 | 1,2 / 1,6 / 2,0 / 2,5 / 3,0 | 2/8/45 + 2/11/63 ASOLE / UNI SLOTS / LANGLÖCHER(*) 2/8/55 + 4/12/64 |
| 40 | 100 | 1,6 / 2,0 / 2,5 / 3,0 | 2/8/55 + 4/12/64 | |
| 300 | 32 | 100 | 1,6 / 2,0 / 2,5 / 3,0 | 2/8/45 + 2/9/50 + 2/11/63 ASOLE / UNI SLOTS / LANGLÖCHER(*) 2/8/55 + 4/12/64 |
| 40 | 100 | 1,6 / 2,0 / 2,5 / 3,0 | 2/8/55 + 4/12/64 | |
| 315 | 32 | 100 | 1,6 / 2,0 / 2,5 / 3,0 / 3,5 | 2/8/45 + 2/11/63 2/8/45 + 2/9/50 + 2/11/63 ASOLE / UNI SLOTS / LANGLÖCHER(*) |
| 40 | 100 | 1,6 / 2,0 / 2,5 / 3,0 / 3,5 | 2/8/55 + 4/12/64 | |
| 325 | 32 | 120 | 2,0 / 2,5 / 3,0 | 2/8/45 + 2/11/63 2/8/45 + 2/9/50 + 2/11/63 ASOLE / UNI SLOTS / LANGLÖCHER(*) |
| 40 | 120 | 2,0 / 2,5 / 3,0 | 2/8/55 + 4/12/64 | |
| 350 | 32 | 120 | 1,8 / 2,0 / 2,5 / 3,0 / 3,5 | 2/8/45 + 2/9/50 + 2/11/63 ASOLE / UNI SLOTS / LANGLÖCHER(*) |
| 40 | 120 | 1,8 / 2,0 / 2,5 / 3,0 / 3,5 | 2/8/55 + 4/12/64 | |
| 50 | 120 | 1,8 / 2,0 / 2,5 / 3,0 / 3,5 | 4/15/80 + 4/14/85 | |
| 370 | 32 | 120 | 2,5 / 3,0 | 2/8/45 + 2/11/63 |
| 40 | 120 | 2,5 / 3,0 / 3,5 | 2/8/55 + 2/12/64 | |
| 50 | 120 | 2,5 / 3,0 | 4/15/80 + 4/14/85 | |
| 400 | 40 | 120 | 2,5 / 3,0 / 3,5 | 2/8/55 + 4/12/64 |
| 50 | 120 | 2,5 / 3,0 / 3,5 / 4,0 | 4/15/80 + 4/14/85 | |
| 425 | 40 | 120 | 2,5 / 3,0 / 3,5 | 2/8/55 + 4/12/64 |
| 50 | 120 | 2,5 / 3,0 / 3,5 / 4,0 | 4/15/80 + 4/14/85 | |
| 450 | 40 | 130 | 2,5 / 3,0 / 3,5 / 4,0 | 2/8/55 + 4/12/64 4/15/80 |
| 50 | 130 | 2,5 / 3,0 / 3,5 / 4,0 | 4/15/80 + 4/14/85 | |
| 500 | 40 | 130 | 3,0 / 3,5 / 4,0 / 5,0 | 2/8/55 + 4/12/64 4/15/80 + 4/14/85 |
| 50 | 130 | 3,0 / 3,5 / 4,0 / 5,0 | 4/15/80 + 4/14/85 | |
| 525 | 50 | 140 | 3,5 / 4,0 | 4/15/80 + 4/14/85 |
| 550 | 50 | 140 | 3,5 / 4,0 / 5,0 | 4/15/80 + 4/14/85 |
| 90 | 200 | 4,0 / 5,0 | 3/12,5/160 | |
| 140 | 225 | 4,0 / 5,0 | 4/17,5/170 | |
| 570 | 50 | 180 | 4,0 / 5,0 | 4/15/80 + 4/14/85 |
| 600 | 50 | 200 | 4,0 / 5,0 | 4/15/80 + 4/14/85 |
| 90 | 200 | 4,0 / 5,0 | 3/12,5/160 | |
| 140 | 225 | 4,0 / 5,0 | 4/17,5/170 | |
| 700 | 50 | 200 | 4,0 / 5,0 | 4/15/80 |
| 80 | 200 | 4,0 / 5,0 | 4/23/120 | |
| 140 | 225 | 4,0 / 5,0 | 4/17,5/170 |
Other dimensions are available upon request